Side outlet of the high temperature submerged pump

    The side outlet of the high temperature submerged pump is that the liquid is inhaled from the bottom inlet and discharged from the side liquid pipe, which is the most common high temperature submerged  pump.
    The pump dues to that the submerged  part of the outlet pipe and the support tube are separated, so its volume is relatively large size. It does not apply to large caliber and it isn’t used that the flow is very big occasions. And the bushing needs to have more reliable washing and lubricating system to ensure the normal operation of the pump.
    The structure of submerged  pump dues to the that the rotating shaft part does not withstand the media pressure, So the requirements of the seal is not high. Some high temperature submerged  pump can only install dust ring. It is difficult to use horizontal pump seal under some occasions and you can use the submerged  pump. If so, all the problem will be solved.