Technology article

搜索:

产品展示分类:

Introduction to the selection of molten salt pump

    You should follow the following principles and procedures to select a molten salt pump.

    One, clear selection’s conditions
    1 Physical and chemical properties of transport media
    2 process parameters
    3 site conditions
    Two, the choice of the type for molten salt pump
    The type of pump should be based on the technology parameter of the device, the physical and chemical properties of conveying medium, operating cycle and the pump's structure characteristics and other factors to select a reasonable choice. You can initially identify the type of pumps that they are reasonable with the requirements of the device parameters and the dielectric properties. Molten salt pump has advantage of simple structure, no pulse infusion, flow simply control.
    Three, the selection of molten salt pump series and material
    Molten salt pump series is refers to the pump with a class structure and the use of pump, such as GY type molten salt pump, RYB molten salt axial flow pump, RXB molten salt circulation pump and so on.
     When you have determined the type of pump, you can choose pump series and materials according to the process parameters and the dielectric properties.
    Four, the determination of molten salt pump’s the model
    When you have determined molten salt pump type, series and materials, you can be based on samples that the pump industry provides and relevant information to determine pump model (specification).
    Five, the determination of the original motive power
    Six, determine the seal
    Seven, coupling and its use
    If you want to know more about the content of the molten salt pump, please see official website of Warwick pump company: www.moltensaltpump.com.


上一条:Step of determining the molten salt pump’s original motive 下一条:Specific speed’s calculation of molten salt pump