What is molten salt submerged pump?

    What is molten salt submerged  pump?

    The working parts of the molten salt pump are submerged in the liquid and shaft seal has no leakage phenomenon. And it covers an small area has advantage of reliable use, convenient maintenance, resistance, corrosion resistance and other characteristics. It is widely used in chemical, pharmaceutical, paper making, oil and other industrial sectors.
    Vertical motor of the molten salt submerged  pump is fixed on the motor seat with fastening bolt. And the elastic coupling with pump direct drive, pump body, pump bracket, intermediate pipe, outlet pipe, pipe flanges, bolts to form one fixed on the bottom plate and the pump body installed in the container through the bottom plate. The axial force and the radial force (including pump, pump operation generated by the water pressure in the impeller, and the weight of the rotor, etc.) due to the bearing box with one-way thrust ball bearings, single row radial ball bearing. And a sliding guide shaft can bear to ensure the normal operation of the pump. The safety bearing is lubricated by grease. And the bearing is lubrication with liquid of delivering. Therefore, when the submerged  level must be higher than the impeller center line. The length that it goes deep into the length of container is different. The structure is divided into the middle of the guide bearing structure and no intermediate guide bearing.
    If you want to know more content of the molten salt submerged  pump, please consult the Jinan Warwick Pump Co., Tel: 0531-85667509.
The content of this website shall not be reproduced without permission.