Flow’s component of molten salt pump

    Flow’s components of molten salt pump are: it conjsists of the suction chamber, the impeller, the pressure chamber. The impeller chamber is the core of molten salt pump. And it is also the core of the flow components. Motor of molten salt pump works done on the liquid by the impeller to increase energy. Impeller is divided into three categories, according to liquid outflow direction:
    (1) The radial impeller (centrifugal impeller) liquid is flowing along the direction of the axis perpendicular to the direction of the impeller.
    (2) Oblique flow impeller (mixed flow impeller) liquid is the direction of the flow along the axis of the impeller flow out of the impeller.
    (3) The axial flow of the impeller is parallel to the axis in the direction of liquid flow.
    Impeller is divided into two categories by inhalation:
    (1) A single suction impeller (i.e., the impeller is sucked in from one side of the liquid).
    (2) double suction impeller (that is, the impeller suction from both sides of the liquid).
    The molten salt pump impeller is divided into three types according to the form of the cover plate:
    (1) Closed impeller.
    (2) Open type impeller.
    (3) Semi open impeller.
    Closed impeller which is widely used, Warwick molten salt pump single suction impeller double suction impeller belong to this form.
    If you want to know more about the daily maintenance of molten salt pump, you can log on Warwick pump company official website: www.moltensaltpump.com.