Classification of molten salt pump

    One, according to the working principle, structure classification
    1 blade molten salt pump: through the pump shaft rotation to drive a variety of impeller blades to liquid centrifugal force or axial force, conveying liquid to the pipe or container, such as centrifugal pump, vortex pump, mixed flow pump, axial flow pump.
    2 volume type molten salt pump: the use of pump cylinder body volume of the continuous change of the transfer of liquid pump, such as reciprocating pump, piston pump, gear pump, screw pump.
    3 Other forms of the pump: the use of electromagnetic transmission of liquid state electrical conductivity of the electromagnetic pump;
    Two, according to the conditions of use classification
    1) Large flow and micro flow pump: flow rate of 300m3/min and 0.O1L/min;
    2) High pressure pump and low pressure pump: high voltage up to 200MPa, vacuum degree is 2.66---10.66kPa (20 - 80mmHg);
    3) High speed pump and low speed pump: high speed up to 24000r/min, low speed 5 - 10r/min;
    4) The accurate metering pump: the measurement accuracy of flow rate is 0.3%;
    5) High viscosity pump: viscosity of thousands of Pa (s) seconds.
    If you want to know more about the content of the molten salt pump classification, please see Warwick pump company official website: www.moltensaltpump.com.