KEYWORDS: High temperature molten salt pump
SERVICE PHONE
+86-0531-85667509
PRODUCT CENTER
SERVICE PHONE
+86-0531-85667509

HOTLINE

+86-0531-85667509
Address:Huaiyin District of Jinan City Road, No. 24566 ten
T e l:+86-0531-85667509
F a x:86-0531-85667508
E-mai:warwickpump@gmail.com

Technology article

location:Home > News > Technology article >

Determining head of molten salt pump

release time:2017/01/03 clicks:

    Head of molten salt pump is a very important performance parameters. How can we to determine the head of molten salt pump?
Determine the head of molten salt pump, you should consider several aspects of the problem according to the theoretical calculation and experience to determine.
    1 the geometric size of the molten salt system, the most critical part is the geometric height.
    2 you can determine the loss according to the length of the pipeline.
    3.The local resistance’s loss of molten salt pipeline system, the main consideration is the number of elbow.
    4 pipeline loss of reactor (heat exchanger) in molten salt heat exchange system.
    5 You can be based on the temperature of the molten salt to determine its viscosity. If the temperature is lower, the viscosity of molten salt is greater.       The loss of friction will be greater.
    In determining the head of molten salt pump, it is best to determine a range. It is also said to determine the maximum and minimum of the molten salt pump’s head. The molten salt pump’s head of the maximum efficiency take the average of two times the value of the 1.1.