Basic requirements for installation of molten salt liquid pu

    Basic requirements for installation of molten salt liquid pump

    The installation of the molten salt pump is good or bad, it would directly affect the use of molten salt pump. It is special for molten salt pump of long-term continuous operation. When it is in the installation, you should pay attention to several aspects:
    1, molten salt liquid pump must be installed vertically on the support plate or the fixed support that it is above the molten salt tank. The support plate and the fixed support should have enough strength.
    2, the molten salt liquid pump should be used to tighten the bolts and salt tank, to reduce vibration.
    3, the suction of the molten salt liquid pump should have a distance with the bottom of the molten salt pool. The distance should be more than 2 times the diameter of inlet to keep the molten salt inlet flowing.
    4, outlet pipe of the molten salt liquid pump must be set up support. It does not allow to the weight of the export pipeline to allow the pump's outlet pipe to withstand. If so, it can prevent the deformation of molten salt pump outlet pipe because of the force.
    5, after the molten salt liquid pump is installed, you should check Kacha phenomenon by hands.