Energy conversion of molten salt pump

    Molten salt pump mainly consists of impeller, shaft, pump casing, shaft seal, seal ring and so on.
    The pump shell generally be full of high temperature molten salt before molten salt pump start. When the original motor of the prime drives the pump shaft and the impeller to rotate, liquid moving along the leaf to do circumference rotation, on the one hand, it is under the action of centrifugal force from the impeller center thrown outwards, liquid from the impeller won the pressure and speed.
    When the fluid flows through the spiral casing to the drain hole, partial velocity will be transformed into static pressure energy. In the liquid thrown in the impeller, impeller center part caused by low pressure area, and the suction of liquid pressure to form a pressure difference, and the liquid is constantly being inhaled and to a certain pressure discharge.
    Through the above energy conversion, the original motivation of the mechanical energy into molten salt pump pressure, pump to transport and increase the role of molten salt pressure.
    If you want to know more about the content of the molten salt pump, please see Warwick pump company official website: www.moltensaltpump.com.